Skip to content

Our Articles

Technical Data Sheets for Darbox Plastic Containers

Dimensions, Weights, Pallet Data and UN Approval

Darbox manufactures and supplies nestable plastic containers for industrial powders and other solids, from 12 to 114 L. This page brings together the technical data for the Darbox product range: dimensions, materials, UN markings, weights, pallet configurations, and applicable certificates. Full technical data sheets are available on request.

By Daniel Hartmann ·

Three white Darbox plastic containers side by side on a warehouse floor: a square SquarePack with a blue lid, a taller rectangular QuadPack and a round SuperPack with a blue lid.

Darbox containers are designed to nest when empty and stack when filled, with dedicated lids for each product range. This article collects the information engineers and buyers need to compare container sizes, plan pallet configurations and complete supplier documentation: technical specifications, pallet data, UN approvals and compliance documents.

Volumes are measured under the lid. Dimensions are external dimensions in millimeters.

All 18 Sizes at a Glance

The Darbox range includes square, rectangular and round plastic containers. Selected sizes carry UN approval as standard, while other models can be supplied with UN-approved configurations upon request.

ContainerCodeVolume (L)Outer dimensions (mm)Body / lidUN mark
SquarePack 12 L60211.4274 × 274 × 210PP / LDPEOptional
SquarePack 16 L66916276 × 276 × 296PP / PPOptional
SquarePack 21 L60120.5274 × 274 × 363PP / LDPEOptional
SquarePack 22 L66822.2276 × 276 × 412PP / PP4H2/Y25/S
SquarePack 25 L66725.8378 × 378 × 249PP / PP4H2/Y25/S
SquarePack 35 L66535.3378 × 378 × 329HDPE / PP4H2/Y30/S
SquarePack 45 L66145.6378 × 378 × 420HDPE / PP4H2/Y50/S
SquarePack 52 L65551.8378 × 378 × 470HDPE / PP4H2/Y55/S
SquarePack 70 L65167.8378 × 378 × 632HDPE / PP4H2/Y60/S, 4H2/X25/S
SnapPack 52 L64852.1568 × 384 × 315PP / PPTo order
SnapPack 75 L64776568 × 384 × 471PP / PPTo order
QuadPack 114 L646112.1598 × 397 × 635HDPE / HDPE4H2/Y50/S
TwistPack 16 L68715.9Ø 336 × 300PP / PP or HDPE1H2/Y18/S
TwistPack 20 L68620.5Ø 336 × 383PP / PP or HDPE1H2/Y22/S
SuperPack 26 L68526.6Ø 380 × 372HDPE / PP1H2/X26/S
SuperPack 32 L68031.7Ø 380 × 445HDPE / PP1H2/Y35/S
SuperPack 47 L67546.7Ø 409 × 547HDPE / PP1H2/Y47/S
SuperPack 53 L67052.4Ø 409 × 620HDPE / PP1H2/Y55/S

UN approval applies to the specific tested packaging configuration. For models available with optional UN approval, the applicable marking must be confirmed when ordering.

The full technical data sheet of each available size can be requested through the product page or by writing to .

Nesting and Pallet Data

Darbox containers are tapered, allowing empty bodies to nest inside one another. This reduces the space required for storage and inbound transportation.

When filled and fitted with their lids, the containers can be stacked in suitable pallet configurations. Actual pallet quantities and stacking conditions depend on the container size, filling weight, pallet dimensions and applicable transport requirements.

Empty container bodies are supplied nested, while lids are packed and shipped separately on their own pallets.

Detailed palletization information is available on request, based on the selected container model and application.

How to Read the UN Mark on a Darbox Container

A UN mark identifies a packaging design that has passed specified performance tests for the transport of dangerous goods.

Take the Darbox SquarePack 35 L as an example, with placeholders for the year and country code:

4H2 / Y30 / S / ** / ## / DB / 1251

  • 4H2 identifies the packaging type: a plastic box.
  • Y indicates approval for packing groups II and III.
  • 30 indicates the maximum gross mass in kilograms for the tested packaging.
  • S indicates packaging intended for solids or inner packagings.
  • ** represents the last two digits of the year of manufacture.
  • ## represents the two-letter country code of the country authorizing the marking.
  • DB / 1251 identifies the manufacturer and approval reference.

Round Darbox containers carry model-specific UN markings, including the 1H2 designation used for plastic drums with removable lids.

A UN approval applies to the tested packaging design and configuration, not automatically to every substance packed inside it.

The shipper is responsible for confirming that the material, packing group, gross mass, packaging configuration and transport conditions comply with the applicable dangerous goods regulations.

Opening and Reclosing UN-Certified Containers

Seven SquarePack sizes (16, 22, 25, 35, 45, 52 and 70 L) and the QuadPack 114 L have lids with an integral tamper-evident tear-off band.

After the band is removed, the lid can still be opened and reclosed. However, the packaging is no longer in its original UN-approved configuration.

Where dangerous goods transport is required, the applicable approved packaging configuration must be maintained.

Company Certificates

Darbox maintains quality, environmental and food safety management certifications relevant to its packaging operations.

ISO 9001:2015 Quality Management System

  • Certificate number: 109714
  • Issued by: SII
  • Valid until: August 4, 2027

ISO 14001 Environmental Management System

Darbox holds ISO 14001 certification for its environmental management system.

HACCP Food Safety Management

  • Certificate number: 109713
  • Issued by: SII
  • Valid until: August 4, 2027

Company certifications and product-specific UN approvals serve different purposes. UN approval must be verified for the relevant packaging model and application.

Documents Available on Request

Technical and compliance documents may vary according to the container model, material grade, application and destination market.

Depending on the product and applicable requirements, Darbox can provide or review requests for:

  • Product technical data sheets
  • Applicable UN approval documentation
  • Food-contact declarations of compliance
  • REACH-related documentation
  • Relevant quality and environmental certificates
  • Product-specific packaging and palletization information

Additional documentation, including material declarations and customer-specific compliance requirements, can be reviewed upon request.

To obtain the relevant documents, contact and specify the container model, intended contents, filling weight, destination market and required documentation.

Request Technical Documentation

Need dimensions, approved filling weights, pallet configurations or compliance documents for a specific Darbox container?

Contact with the product code and your application requirements to receive the relevant technical information.

Frequently asked questions

Are the volumes nominal or measured?

The volumes in the main table are measured under the lid. Technical data sheets may also specify the brimful volume, which is slightly higher. For example, the SquarePack 35 L has a nominal capacity of 35.28 L and a brimful volume of 36 L.

How many empty containers fit on a pallet?

It depends on the container size and pallet dimensions. Darbox containers are supplied nested, allowing multiple empty bodies to be packed together efficiently. Lids are packed separately. The exact quantity per pallet can be provided for the selected model and shipping configuration.

How many filled containers can be stacked?

The permissible stacking height depends on the container model, filling weight, pallet dimensions and transport or storage conditions. UN-certified containers must also be used in accordance with their approved configuration and applicable test limitations. Darbox can provide product-specific stacking and palletization information upon request.

Do lids come with the containers?

Lids are ordered as separate items and packed and shipped separately. This allows empty container bodies to nest efficiently, reducing storage and transport space.

How does closing a Darbox container compare with a drum that uses a metal clamping ring?

Darbox containers can also reduce operator handling time during filling and closing. With conventional fiber drums or PE drums using metal clamping rings, the process typically involves releasing the metal ring, removing the lid, inserting the inner liner, filling the container, replacing the lid, securing the metal ring and applying a tamper-evident seal. Darbox SquarePack containers with press-on, tamper-evident lids simplify this process by eliminating the separate metal clamping ring and sealing step. The lid is pressed directly onto the container, reducing manual handling steps and saving operator time.

Are all Darbox containers UN-certified?

No. Selected Darbox containers carry UN approval as standard, while some models can be supplied in UN-approved configurations upon request. The applicable UN marking and approved gross mass depend on the container model and tested packaging configuration.

Can Darbox containers be reused?

Darbox containers are designed for robust industrial handling and may be reused where their condition, intended application and applicable requirements permit. For containers with tamper-evident tear-off bands, removing the band does not necessarily prevent further physical use, but the opened packaging is no longer in its original UN-approved configuration.

How do I get the full technical data sheet of a size?

Use the request option on the relevant product page or write to sales@darbox.com, specifying the container size and item number. Detailed data sheets are available for selected models, including SquarePack 35 L, 52 L and 70 L, and QuadPack 114 L. Technical information for other sizes can be requested from the Darbox team.

What is the minimum order and lead time?

Minimum order quantities and delivery times depend on the container model, required quantity, configuration and destination. Contact Darbox with the selected product, expected annual volume and delivery location to receive the applicable commercial and delivery information.

Related articles